Ableton live 9 suite documentation free download –

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
OK I didn’t launched it after the Ableton installer has finished but then it’s the same as before. Scene Follow Actions let you create evolving arrangements. I am trying to download this, abletton I have no Idea what to приведенная ссылка when It asks me what startup file to run. Remote mappings via a Max for Live device would not work for toggle parameters anymore.
 
 

Ableton live 9 suite documentation free download. What’s new in Live 11

 

Platforms: Downloads: Wine: 3. From Ableton. По ссылке ideas, make changes without stopping, and capture everything as you work. But Live also features the revolutionary Session View: a unique sketchpad for improvising, playing and performing with musical ideas, without the ableton live 9 suite documentation free download of the timeline.

Freely and independently start and stop any number of audio or MIDI loops – everything stays in sync. Tried to install wineasio component, but there is Error in source pustek is not part of the ‘audio’ group. Please add pustek to ‘audio’ group. Hi, I’m new to this PlayOnLinux debugging tool v4.

Warning: This is a PlayOnLinux script logfile. Read the content of this file for more information wine Hi, I can’t seem to get Ableton Live 9 standard to install. Can’t afford documejtation DAW right now, would rather having Live running адрес страницы my ubuntu machine, which is way better than my windoze one. It creates the drive, but fails to ссылка live.

I’ve tried running the. I also tried using a docuumentation version of Wine in the drive, which gave slightly different errors see below. Any help would be appreciated! With Ableton Dodnload Version 9. Documentatlon is the ableton live 9 suite documentation free download file:. To enable Wine to use TrueType fonts please install a version of FreeType greater than or equal to 2. Using the installer from the Ableton site, the answers here, and a few hours of trial and error Documentatiom managed to get wine to cooperate enough to install it.

I found an answer in the Ubuntu forums that suggested it was a VCRuntime issue. I installed the vcrun components, and while the library overrides exist in the wine configuration menu, it still crashes at load.

Also, Ddocumentation seem to be unable to get the download links here to work. I clicked them a couple of times early in the process but it seemed to get no response from Chromium or the POL app.

Hi, I am just starting to use linux, and im not quite sure how to get ableton to work. When I select the Setup. I am trying to install live 9 lite, and I don’t know what the problem is. If anyone can help that would be great. Hi, i’ve recently installed ubuntu so please forgive me if im doing something stupid but i’ve attempted to download live 9 and i get to the point where i locate the file for playonlinux to download and i get this response.

Usually, you can find it in the winbind package of your distribution. Hi, first of all: Sorry if I don’t understand everything immideatly immediatly, but I’m a Linux beginner, but I’ll give my best. Wine 1. I am trying to download this, but I have no Idea what to do when It asks me what startup file to run.

I know this may be a stupid question, but I am new to linux. This program works great I have just moved over to using Linux and am still getting used to it. You are here. Supported ableton live 9 suite documentation free download Ableton Live 9. New installer. Information This installer has been approved by the team.

Install this program. Last revision : Distribution used to test : Kubuntu Warning This update has not been approved yet by the team. Use it at your own risk. Try this update. I added my ubuntu user audio group, but no success. How to add user to audio group in Lve Or what is required? Message Hi, I’m new to this Thank you Information This update has been ableton live 9 suite documentation free download by the team. Updating Wine version to one that is said to взято отсюда working.

Message ableton live 9 suite documentation free download. I will update it now. Message The installation program crashes. Can’t wait to see this fixed! Message Hi, I can’t abletoon to get Ableton Live 9 standard to install. Forgot to mention I was trying to install Ableton Live 9. To be honest, it will run better on windows. Ableton on Linux is not ideal unless you are running jack and wineasio. I feel like the installer being used is less than legit.

Have you tried any native solutions? I was planning on running with jack and wineasio. I’ve just spent a lot of time learning Ableton, don’t really want to start over with another DAW just yet. I take it you didn’t see anything in the logs that might help?

Have you tried manually making a shortcut to the exe using “Make a new shortcut from this virtual drive” on the virtual drive created by the POL install script in the application? I’ve had a couple of applications that POL crashed on but it turned out to be post-install so they abletpn like a charm after creating the shortcuts. I can verify that 9. I do see an error, but I don’t know if that is the actual cause of the crash. I was going to suggest doing what KaliDevi said; try to manually create the shortcut.

If that doesn’t work, you may want to open a bug report directly with winehq. Message I am running Ubuntu I am now stuck on a crash at load due to some missing libraries. I have Ableton Live 9 Lite. Using the setup. Okay well that wasn’t at all how that was supposed to go and skite doesn’t seem like I can actually delete previous comments. Sorry for clogging things up visually.

Hey, geist, who you managed to get that? So, what would you recommend to fix this? Thanks :D. Message Hi, I am just starting to use linux, dlwnload im not quite sure how to get ableton to work.

So far Ableton is the only program that makes me seriously consider buying a windows license. So if I could get this to work I would forever be grateful. Can you post your debug logs, please? Also a native solution is called BitWig, and it’s made by some of the dudes that worked at Ableton. I have been using Ableton for like, 15 years or more.

Since the acrobat pro change size free download first version. The ableton live 9 suite documentation free download other thing that got me to switch was BitWig. It’s so amazing. Does pretty much everything ableton can and more. Something to maybe consider. It runs great vocumentation Linux too. And Bitwig isn’t exactly an option for me, because I use Ableton for launchpad covers, and most people make their covers in Ableton.

Go to tools, manages wine versions, and install the newest жмите сюда of 32 bit wine. Then go in to the general tab of that virtual drive, and switch it to use that version. Then in the misc tab, use the option to run an exercise in that virtual drive, and run the installer from there. This script hasn’t been updated in ableton live 9 suite documentation free download while, and it’s using an older version.

Also, make sure you are using a 33 hit version of ableton. I’m also not sure if the launchpad will work through wine.

 

Ableton live 9 suite documentation free download –

 

Push 1 can now utilize custom device banks for Simpler. Dynamic parameter banks are in place for Push 1 as well.

Parameters that don’t have an effect due to some other parameter being disabled will now be hidden. The encoder resolution for Push 1 was significantly different as of Live 9. This has now been rectified. Fractions were not shown correctly for Simpler on the Push1 display. Quantized parameters were not displayed correctly on Push1’s bar graph. Improved meters: the track volume meters now show both peak and RMS levels. Simpler has been completely overhauled with a new interface, Warping, slicing, and new analog modelled filters build in conjunction with Cytomic.

Audio Effect Racks now load with devices hidden. Sets created with 9. When trying to Save a set created with a previous version in 9. A breakout view is added for Simpler. The breakout view can only be displayed when Simpler has a valid sample The Warped waveform is displayed accordingly in Simpler.

Added a button in the Simpler breakout which warps the region between the sample’s start and end markers as a certain number of bars.

Added One Shot mode in Simpler. Slicing mode has been added to Simpler. When active, all transients between start and end flags will be used for generating the slices It is now possible to normalize a sample via a context menu option by right clicking on Simpler’s waveform. Added the possibility to slicing to a Drum Rack from Simpler. A sample volume control Gain is now added to Simpler.

When loading a Simpler, Auto Filter or Operator preset created with a previous Live version, the devices will work in legacy mode, in order to preserve the original sound. The filters will be automatically upgraded if these were not active in the preset.

Creating a multi selection for a number of chains in a Drum Rack enables setting the choke group for all chains at once. When instantiating a plug-in, up to 64 parameters get configured automatically now. This is done via a new context menu entry available in Live’s plug-in device. Improved performance when drawing waveforms for large sets with many clips. Introduced a limitation to how many time a sample can be sped up or slowed down via “:2” or “x2” respectively, in order to save CPU power.

Improved the automation smoothing for the new filters in Simpler, Operator and Auto Filter. Removed the limitation to the amount of transposition affecting samples when using Complex or Complex Pro. Bugfixes: It is not possible to inadvertently save a Live Set to the Trash anymore. The ‘Warp as x bars’ feature is improved so to provide more musical and predictable values. Light blue color tones have changed to avoid being confused with the selection color when using the default Live skin.

Specific plug-ins would have triggered Live to configure non-functional parameters after a preset change. Changes for Push: Introduced support for Push 2. It is now possible to preview sounds from the browser with Push 1 as well. It is now possible to load Samples from Push. These will be instantiated in Simpler. It is now possible to duplicate Drum Rack pads from Push 1 as well. Scales settings are now stored in Live sets. When recording with Fixed Length: Off, pressing fixed length will now stop recording and loop the last bars of the recording according to the fixed length setting.

Fixed a bug which would cause the Clip selector in the step sequencer to be displayed after deleting a Clip. MIDI Note Off messages could be skipped as a consequence of an audio drop out, resulting in hanging notes. CPU spikes leading to drop outs could occur when firing Clips, stopping Clips, Clip editing during playback, Clip scrubbing and when pressing the Back to Arrangement button. This bug fix also improves scaled drawing performance on Windows bit.

Changes for Push: The step sequencer ‘Note Settings’ view could not be exited anymore if accessed while in Hotswap mode. Replaced the icon for Current Project in the browser sidebar. Live would crash when dragging a Clip in the Groove Pool. Audio Units would stop passing audio after changing the sample rate. Added control surface support for the Akai Professional Advance keyboard series.

Bugfixes: Fixed a crash which might take place in Live 9. Auto-scrolling in session view could get stuck after releasing the mouse, when dragging a device across the splitter between browser and session view. Fix a rare crash which could occur when closing plugin windows on Mac. Improved tempo detection for warped audio files where the tempo appears to be constant. Improved warp downbeat detection.

The first warp marker 1. Improved the sound of Complex and Complex Pro Warp modes. Added the option “Warp Selection as x-Bar Loop” in the context menu when right clicking on a time selection inside an audio clip.

Live Sets that contain Max for Live devices or third-party plug-ins now have lower latency. The latency introduced by a device is now displayed in the status bar, when hovering over the title bar with the mouse. No latencies are shown when latency compensation is turned off. Automation and Modulation are now fully latency compensated. Modifying the Arrangement loop brace with mouse or keys will not affect the current track selection, while previously all tracks were selected as soon as the braces where adjusted with the mouse.

The Serato bridge is now compatible with Live 9. Updated and Kits with better sounding Kicks and Snares. The Session Ring would not be entirely displayed on screen anymore when navigating through tracks if the Live Set contained folded Group tracks. Fixed a bug in the Axiom Air 25, 49 and 61 Control Surface remote script, where the Send mix mode controlled the available Sends for the currently selected channel, instead of controlling Send A for the first 8 channels.

Fixed a bug which caused artefacts in the waveform visualisation when increasing the Gain on low amplitude audio clips. The Live browser “All Results” label would not remember the settings for the optional second column. Fixed a rare crash which might happen on OS X with certain input sources. Fixed a crash which might occur when deleting several Max for Live devices from a Live Set at once.

Live would crash when quitting the application while renaming a Groove in the Groove Pool. A Live Set might become corrupt when saved after a crash recovery, if the original Live Set had meanwhile been modified by a different Live instance. Notes at the beginning of Clips would not be triggered when rendering or freezing tracks containing Max for Live devices or third party plugins.

Remote mappings via a Max for Live device would not work for toggle parameters anymore. Minor adjustments to the translations of Clip context menus. Overdrive would report a wrong latency value, thus would not correctly be compensated.

Redux would report a wrong latency value when in Soft mode, thus would not correctly be compensated. Minor GUI bugfixes for high resolution displays. Fixed a bug which could cause graphics glitches and crashes on OSX when using high resolution displays.

Fixed a bug where the mouse cursor would stay in stopwatch or beachball mode until the user physically moved the mouse. This would happen after loading devices, live sets, or anything else which would necessitate the use of the stopwatch cursor. Updated the pixel font used primarily in device LCDs like Operator for retina displays. Also improved the aspect of envelope curves drawn in the device’s LCD displays. Fixed a glitch where the modulated value would become visible as an orange dot while dragging a slider, even if no modulation exists.

Holding “Delete” and tapping an encoder on Push resets the respective parameter to the default setting. Holding “Shift” while turning an encoder on Push changes the respective parameter with finer resolution. Improved buttons readability on Push. The Repeat and Metronome buttons now blink if active. This caused the very first note in the Clip not to be played back at all. Live will not auto-update to versions above 9. Fixed a bug which caused modulations for arrangement clips to disappear when undoing and redoing after duplicating a track.

Fixed a graphics problem which could occur on OS X The Simpler instrument could lose certain macro mappings after converting a Sampler to Simpler and then enabling Simpler’s Pitch Envelope. Fixed the spacing of the “Hz” icon on Simpler’s LFO Rate switch on Retina displays Under certain conditions, the Tension instrument could produce unwanted noise bursts after loading a preset and then playing the first note.

Live could crash when undoing and redoing after importing a clip or a track containing automation from the browser. Live would also keep crashing when recovering the Live Set from the undo file. Note that this requires a Mac with OS X Added native full screen support for Mac OS X. Note that this requires Users with older OS X versions and Windows users are not affected by this change.

Updated info texts and manuals. Some chooser controls would clip the right side of an active entry when closed, e. This is now fixed. Fixed a crash that could occur under certain conditions when loading Live sets containing a large amount of VST plug-ins and Max for Live devices.

Fixed a crash that could occur when hovering over an automation breakpoint or segment on the first automation lane of an Arrangement track and then forcing another automation to be shown on the same lane, e. Max for Live MIDI effect devices would not be correctly latency-compensated when the device was turned off and the device had an additional latency defined in its patcher inspector. Improved the threshold for inverting text colour of clip names, chains, macros, etc.

Bugfixes: The [live. The Launchpad’s Mixer mode would stop working after using the Launchpad’s Session Zoom feature in Live sets containing more that 8 tracks. Changes for Push: When using a low audio buffer size or high sample rate, Push’s buttons would not be backlit after launching Live Windows only.

When entering Scales mode on Push, the Selection and State Control buttons would not light up until one of them is pressed once. Push’s Duplicate button would not work anymore for clips, tracks and scenes if Clip workflow is selected. Auxiliary audio outputs of certain VST plug-ins would not be delay-compensated anymore. Observing or controlling the APC40 button matrix with a Max for Live device would not work after disabling the control surface.

Fixed an issue which caused the Filter Type and its automation if existing to be set to an incorrect type after converting Simpler to Sampler or vice-versa. Bugfixes: Fixed an issue which caused CPU spikes when moving a MIDI note in a track containing certain Ableton devices with automated parameters while the transport is not playing. Fixed a bug that caused the active Control Scripts to be loaded again when activating an additional Control Surface.

Enabling multiple tracks for recording and then triggering the Session Record button from the APC40 MKII would only record into the currently selected track instead of all armed tracks.

Fixed an issue on the Mackie Control Pro where the display would not show the parameter’s values correctly, after previously enabling the level meters. Fixed a graphical glitch which could occur when changing an Arrangement track’s vertical zoom level via the Mackie Control or a Max for Live device. Under certain conditions, this could also lead to a crash. Importing a Session View clip containing automation for a Max for Live device into another Live Set would create automation breakpoints in the Arrangement View.

When loop is activated in the Arrangement View, MIDI sustain messages and other CC messages would not be recorded reliably after the first loop iteration. When configuring plug-in parameters, some sliders in Live’s plug-in panel would not match the position of the respective parameter in the plug-in GUI. Text in deactivated clips was not readable with certain skins.

Fixed a crash which might occur when renaming a Drum Rack pad while triggering another pad. Live could crash under certain conditions when running as a ReWire slave and creating a new Live Set without saving the previous Set. Under certain circumstances, Live would delete send automation or modulation envelopes from clips when exporting clips or tracks to the browser. Additionally, Live could crash when using the undo feature after such an export operation. Updated control surface documentation.

Improved readability of text in clips, tracks, chains and macro controls. The text color is now automatically inverted, depending on the background color. Bugfixes: Live would show cryptic error messages in case it detects and repairs a corrupt database. Now it shows something more meaningful. Looped clip envelopes could have an incorrect length after unlinking the envelope, linking it again and then moving the clip from Session View to the Arrangement View.

When overdubbing a MIDI clip in the Arrangement View, the resulting clip would not be cropped to the correct content, but would contain all other notes of the track. A playing clip in the last scene would stop playing when deleting a scene above it. Fixed a bug that could occur when recording automation over a loop jump in a Session View clip when the Arrangement View’s loop is active. Plug-in parameters of certain VST plug-ins would not instantly update on the custom plug-in window after changing presets.

Fixed a crash that could occur on Mac OS X when quitting the application while Live is buffering samples. Fixed a crash which could occur in the bit version of Live when loading presets containing a very large amount of devices. Fixed a crash that could occur under certain conditions when moving scenes and then using Undo.

Live 9 Intro or Lite would crash when importing an audio clip which uses the Complex or Complex Pro warp mode Windows only. Changes for Push: It wasn’t possible to edit device parameters if a track’s input routing was set to “No Input”. Audio clip recording could be interrupted when choosing another track with Push, even if Exclusive Arm is deactivated in Live’s preferences.

When selecting a track, the Melodic Step Sequencer would sometimes not select a page in the currently playing clip. Live would always record the last received CC value into a MIDI clip, even if it was received before the actual recording was started.

Note that this change might affect compatibility with 3rd party control surface scripts, i. Please contact the manufacturer of the script in case you encounter any problems. Live would cut off all currently playing notes on a MIDI clip when engaging overdub recording in the Arrangement View.

When recording clips on multiple tracks in Session View by triggering a whole scene, clip recording would sometimes be aborted too early in some slots. Live would freeze when setting the loop length of an unlinked clip envelope to the minimum value.

Fixed a crash that could occur when creating audio feedback routings with drum rack sends, for example when routing a return chain to itself. Live could crash under certain conditions when flattening clips containing automation envelopes. Live could crash after using ‘Capture and Insert Scene’ on the last available Session scene and then undoing that action.

Max for Live devices could be out of sync when exporting audio with multiprocessor support enabled. Push’s display now indicates if a selected track is frozen and cannot be modified. Push could freeze when browsing user folders, in case a path name contained certain special characters.

Fixed a rounding problem that could sometimes occur with the bar graph that shows up on the display when tweaking an encoder. When exporting audio, sample-rate conversion is now done using the high-quality SoX Resampler Library, resulting in higher quality exports when rendering to a lower sample rate.

Live now uses multiple CPU cores when exporting audio and the normalisation process is faster than before. When exporting audio files from Live with the option “Create Analysis File” enabled, Live will now save warp markers with the. It will now close any secondary window that is open. If no secondary window is open, it does nothing. The audio buffer size is now restricted to power-of-two values. Windows users should note that not all ASIO drivers support this and may still allow to use non power-of-two values.

This can lead to a higher CPU load and higher latencies. Ableton recommends to always use power-of-two buffer sizes, i. Added 10 new Simpler presets to the Core Library. Updated manuals, lessons, info texts and translations. Minor improvements for usage data reporting. Now it moves the selection to the clip slot that matches the Session View’s crosshair.

Bugfixes The mouse and keyboard could sometimes become unresponsive after zooming, scrolling or tweaking parameters on OS X Automatic updates could break an installation if the update process was interrupted. Automatic updates would not work when running Live in ReWire slave mode. Therefore, automatic updates are now turned off in this case. Live would not check if there’s enough free disk space available before applying an automatic update. Fixed a problem which could lead to a memory leak in the Ableton Index and Web Connector processes.

Loading Live Sets and presets could take longer than necessary if the file contains references to missing samples. Decreasing and then increasing the audio buffer size in the Audio preferences tab could cause permanent crackling on Mac OS X Two crossfaded clips running in ‘Complex’ or ‘Complex Pro’ warp mode could cause crackles and dropouts if the samples were time-stretched.

Negative sample offset modulation of the Beats warp mode would not work correctly and could lead to disk overloads. The Sampler device occasionally produced a red ‘D’ harddisk warning if the sample is played very fast high note, low base note. The fix reduces the likelihood of such disk dropout warnings. Audio effects or racks with a high overall latency would not be rendered correctly.

The beginning of the rendered file could contain a short period of the dry signal. Fixed a bug that could cause parts of a waveform to disappear when dragging a warp marker. Live would select clips slots when clicking and dragging in the empty area below the clips slots. Fixed a bug which could prevent certain AU plug-in windows from closing in the bit version.

Looping automation in Session View clips was not correctly disabled when touching an automated parameter with the mouse. I could live with that but I also can’t authorize my account and that”s still a big problem. Can you help me with that? Do you need the debug logs again?

Is there maybe a serious problem with wine or so? Make sure you don’t open Ableton right after the install. Uncheck any boxes that say “Run Ableton” or anything like that, and let the installer finish. When the POL installer finishes it will automatically close and create the shortcut so you don’t have to keep installing it. You should also be able to authorize it, too. I did. It works the same as it normally would. I am sure that there is nothing wrong with Wine in those other cases; you could be missing certain libraries or drivers or something like that for those other programs.

Also, don’t bother with iTunes if you are trying to sync your music to your iDevices; that feature does not work on Linux as there are no drivers for it. I hear that some devices work and that there is a driver floating around, but I have never actually seen it.

If you need help with those other programs, please feel free to post in the forums with the debug logs for it, and someone here will be able to help you with it. OK I didn’t launched it after the Ableton installer has finished but then it’s the same as before. The POL installer won’t finish and keeps running until you quit it.

After that I created the shortcut and it works as if I directly launch it, means I can’t authorize it. I didn’t worked so far with it so I can’t say if there are other functions won’t work as well. You have any other idea what the problem could be why I can’t authorize?

Ok just mentioned the other programs because I thought maybe it could help the get the problem. I allready know that i can’t sync those devices but i can’t even install those programs. Yeah thanks, I gonna ask for it if I have the time but first I want to get Ableton running. Message I am trying to download this, but I have no Idea what to do when It asks me what startup file to run. It says it cannot find the binary.

I am using the free demo. It sounds like it did not install correctly. We need your full debug logs in order to troubleshoot it properly, though. Let’s see what those say and perhaps it will state why it is failing. There is also BitWig; an extremely powerful alternative to Ableton that has a native Linux version. I have been using Ableton since it’s inception, but I gotta tell ya; BitWig has swayed me heavily.

It’s pretty awesome and supports much of the same things, has an open API for it’s controller interface. I could go on. It is for sure something to check out. I bought the thing because it was so awesome combined with Jack and an RT kernel Never had better performance out of my audio devices.

For sure something to check out. Which is why we have a wiki. I think this is what you want. So after installation the script cannot find either Live Suite 9.

Hello there. Is there a solution for this? Did someone know how to install Max4Live with Playonlinux? The installer failed. If a patch is available, we can build a version of Wine that makes it work. It does not say that it is missing. It says that it could not import it. Again, this is something that will likely have to be taken care of by an actual Wine developer, as even their appdb gives it a rating of “garbage”, which means no one has had it working through Wine yet or at least if they did, they never reported it.

I have tried to get it working before, and gave up. It’s impossible to tell without debug output, and even then it just doesn’t really work on wine. JavaScript is not the same as Java, either.

It gets pretty hairy. Again, it’s something that will winehq will likely need to take care of in terms of a patch or something. Don’t run it in multicore support mode. It pegs the CPU through the roof. Hopefully when bit support is better with wine we will see that come in to play.

Have you heard of BitWig? It runs native on Linux and was created by a bunch of former ableton developers. It’s actually extremely awesome. I run that mostly now instead of ableton. It’s not a direct replacement, but it has a lot of stuff that Ableton can’t touch.

I have used quite a few distros and all work more or less the same for live. For the most part, Linux is linux is linux. I have used live on a good chunk of the major distros, and they all pretty much perform the same. As for BitWig, what does it matter what the buttons look like?

That is like saying I hate corvette because they come in yellow and I hate yellow. Plus, it runs on Linux. It’s extremely, extremely powerful, just like live,and actually does many things that Ableton cannot do. I have running Jack Realtime Mode but i get many xruns. I did a few of the NI ones check the Install menu. They are there. They all worked fine, though. As far as xruns with Jack, check the Arch Linux wiki entry about jack.

It’s very concise and will likely lead you to fine tuning jack better. I prefer the rt kernel. The Jack entry in the Arch wiki will tell you everything that you need to know.

As far as dependencies for Massive, check appdb. Search for the name of the individual instruments. Like Guitar Rig, FM8,etc. Regarding the original poster’s question “Binary not found: Ableton Live 9 Suite. Hope that helps.

Spectral Resonator see Chorus-Ensemble see Phaser-Flanger see Shifter see Redux see Align Delay see Shaper MIDI see Updated the appearance of the UI in the Tension see Sampler and Simpler now support MPE. The number of visible Macro Controls in Instrument Racks can now be controlled from a Max for Live device or a control surface. The Cytomic Filters, which are used in the Wavetable, Echo, Simpler, Sampler, Operator, and Auto Filter devices, have been updated and improved in stability, sound and performance.

As of An update to the Softtube libraries may cause subtle sound changes in the Amp and Cabinet audio effects. Follow Actions can now be assigned to scenes via the new Scene View.

Clip Follow Actions will continue to run when a scene Follow Action is created or scheduled, however scene Follow Actions take precedence when triggered. This button is disabled by default, and can be toggled using the Shift – Enter keyboard shortcut.

When disabled, no Follow Actions will occur in the Live Set. These values can be modified using a new slider control. The Follow Action Chance slider now displays a split triangle instead of just a black bar when it is showing multiple different values.

This palette makes clips and tracks easier to tell apart with a deuteranopia, protanopia or tritanopia color vision deficiency. Added an Arm Track command to the Edit menu.

If multiple tracks are selected, the command appears as Arm Tracks. If the selected track is armed, the command is replaced with Disarm Track. It is now possible to arm selected tracks using the C shortcut key. The Groove Pool now opens automatically when loading a groove file from the browser by double-clicking or pressing the Enter key, adding a groove to the Groove Pool, or extracting grooves.

You can use the left and right arrow keys to navigate radio buttons anywhere in Live. If you are navigating radio buttons on a device that is inside of a Rack with the left and right arrow keys, you can get back to moving between devices in the Rack using the left and right arrow keys by hitting the ESC key.

In Session and Arrangement View, the Monitor radio buttons now have a default state that can be restored.

This option is also accessible via the Edit menu option Return to Default. When enabled, certain MIDI control message types that are not automated for a given clip will automatically reset at the start of a new clip. Added support for keyboard shortcuts on French keyboard layouts for macOS versions Keyboard shortcuts that have numbers can be accessed without having to press Shift to access the number keys.

Introduced linked-track editing see 6. Linked-track editing makes it possible to use comping workflows and other phase-locked editing operations on multiple tracks at once. Any tracks in the Arrangement View can now be linked so that their content can be edited simultaneously. There can be multiple instances of linked tracks in a Set, however each track can only belong to one of these instances.

The Expression Control device now allows assigning an additional parameter as a mapping target.