Windows 10 hangs on startup black screen free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Though, if it is a software problem, then you can try to fix it by following these suggestions. Click any one of them to solve your problems! If you are lucky, then chances are that your system is just running slow or has gone into hibernation mode. In this case, you can use the correct key combinations to wake your system up:. You can also get the computer black screen after login due to an error with Windows Explorer as well. For instance, the explorer process might not have been launched correctly.

Since it is responsible for the overall user interface in Windows, it is recommended to simply restart the process.

Step 1. Step 2. From here, click on the ” More Details ” option to get a detailed list of all the tasks running in Windows. Step 3. Now, just select Windows Explorer from the list of the processes and click on the ” Restart ” button to launch it again. A while back, I tried to update the installed display adapter driver on my PC. Sadly, the update was either corrupted or got halted in between that resulted in the black screen after the login problem.

Therefore, if you have also encountered a similar situation, then you can try to roll back the display adapter driver to its previously installed driver settings. All you got to do is go to the Start menu and launch Control Panel from there. This will let you roll back the adapter settings to an existing setting to avoid any display issue. Apart from rolling back to a previous update, you can also consider reinstalling the display adapter driver as well. Instead of the Roll Back, just click on the ” Uninstall ” button and follow a simple wizard to remove the driver.

Afterward, you can follow the same steps to install the drivers instead. Furthermore, if you want, you can just select and right-click the drivers in the Device Manager window to get the Uninstall option. Some experts even recommend disabling the drivers and later enabling them to fix the Windows 10 black screen after login error. Since this would reset your drivers, chances are that it can also fix the PC black screen after login problem.

Performing a system restore is one of the best ways to fix various issues with a Windows PC like black screen after login. In this, we will revert to a previous Restore Point for all the system settings and user data. Therefore, before you proceed, make sure you already have a Restore Point maintained.

Details required :. Cancel Submit. Hi Zubair. You said you were getting a boot menu after BIOS screen. Do you have a dual or multi-boot setup? Here are steps to recover from failed Updates or Version Update install which cause Windows to fail to start or function. If any steps won’t work then report back and move on to the next. Easiest is to restart or force shutdown the PC 3 times to force it into Repair Mode. If you are able to access System Restore or Go Back and it fails, skip to step 3.

The bootable media is also the only method that doesn’t require the password if you’re stuck on that. If this fails try a Startup Repair, or go back to Troubleshoot Options on the previous screen to Reset your PC which will save your files while reinstalling Windows. The link compiles the best possible install of Windows 10 that will stay that way as long as you stick with the tools and methods given. Make sure during the booted install to follow the illustrated steps to delete all partitions down to Unallocated Space to get it cleanest, then click Next to let it auto-create the needed partitions, format them and begin install – this makes it foolproof.

I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it’s resolved. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP Potentially Unwanted Products.

Thoroughly research any product advertised on the sites before you decide to download and install it. Now, left-click on the Graphic card you want to take actions on, and choose from the options Update, Disable, or Uninstall, as per your requirement. BIOS in your Windows 10 system is one of the most important software. It is a Basic Input and Output System and is used by your computer’s microprocessor. It helps the processor in getting your Windows ready.

It also helps with input from your input devices and output to your output devices. It plays a role in all kinds of data flow inside your system, to your system, and from your system. Sometimes a problem in the BIOS software can result in the error that causes Windows 10 black screen with or without a cursor.

Sometimes updating BIOS software can also repair the issue of the black screen with cursor on Windows. If you want to update your BIOS, you can visit the website of your Motherboard manufacturer and follow the instructions to download and update the latest version of BIOS on your system. But, as BIOS is extremely critical software for your Windows system, and is extremely complicated to deal with, we recommend you to consult a professional to update your BIOS and fix the problem of the black screen with cursor on your PC.

If the black screen with cursor issue on your PC is a result of a bug in your Windows, then resetting your Windows PC is the most basic yet most useful thing you can do. Though the Reset your PC tool allows you to keep your personal files, we recommend taking a secure backup to avoid data loss. Step 1. Once you are in the Safe Mode, from your Desktop, go to the “Start” menu. Click on the “Settings” icon to be redirected to the “System Settings” window. You will be directed to a mini window.

You will be asked whether you wish to keep your files or not. Choose the option as per your requirements and proceed ahead according to the instructions. If you know which software is causing the black screen problem, then you can remove the problematic software. In the Run search box, type “appwiz. From here you can find and remove any problematic software that’s causing the issue of black screen on your PC.

Windows allows you to boot your PC in a clean state. It means booting your PC with all the unnecessary programs disabled. This can help you in finding the problem. Now go to the “Services” tab on the window panel that pops up. Once you are under the “Services”, go to the “Hide all Microsoft Services” option located at the bottom edge of the window on the right side, and then click the Check-box next to it.

Once done, click on the “Disable All” option located at the bottom left of the window. Now, switch to the “Startup” tab located next to the “Service” tab on the same window. On the Startup tab, you’ll see the “Open Task Manager” option. Click on it to open Task Manager. On the Task Manager window, look for any Startup program that you think might be causing a problem. Disable all such Startup programs one by one using the “Disable” button at the bottom left of the window.

Once it’s done, close the Task Manager by using “X” for the selective window, and then click on “OK” on the Startup tab. Now your PC will restart only with essential programs.

 
 

 

Windows 10 hangs on startup black screen free

 

На нем располагался щедрый набор фирменных открыток отеля, почтовая бумага, конверты и ручки. Беккер вложил в конверт чистый листок бумаги, надписал его всего одним словом: «Росио» – и вернулся к консьержу. – Извините, что я снова вас беспокою, – сказал он застенчиво.  – Я вел себя довольно глупо.

 
 

Are You Bothered by Computer Black Screen Issue?.Windows 10 hangs on startup black screen free

 
 

Cancel Submit. Hi, Thank you for posting your query on Microsoft Community. We regret the inconvenience caused to you. Let me assist you. I suggest you to try to boot in Safe Mode and check if the issue occurs. Refer the link below for steps how to boot your system in Safe Mode. Method 2: Run a Startup Repair on the system This is an alternate way to boot the PC and run recovery tools when something goes wrong with the Operating system. Thanks for your feedback. How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site. Yes No. Sorry this didn’t help. In second attempt I can boot the machine, and then it works flawlessly. I mean after shutting down through power button and start again. The system is MSI laptop, not the gaming one. In that an MSI application named creator center has been installed.

I disabled that one at startup. Lets see how it goes afterwards. I’ll reply back. I am not getting the issue for the past 2 weeks. Just once happened after update and restart of version 20H2. Step 2. From here, click on the ” More Details ” option to get a detailed list of all the tasks running in Windows.

Step 3. Now, just select Windows Explorer from the list of the processes and click on the ” Restart ” button to launch it again. A while back, I tried to update the installed display adapter driver on my PC. Sadly, the update was either corrupted or got halted in between that resulted in the black screen after the login problem. Therefore, if you have also encountered a similar situation, then you can try to roll back the display adapter driver to its previously installed driver settings. All you got to do is go to the Start menu and launch Control Panel from there.

This will let you roll back the adapter settings to an existing setting to avoid any display issue. Apart from rolling back to a previous update, you can also consider reinstalling the display adapter driver as well. Instead of the Roll Back, just click on the ” Uninstall ” button and follow a simple wizard to remove the driver.

Afterward, you can follow the same steps to install the drivers instead. Furthermore, if you want, you can just select and right-click the drivers in the Device Manager window to get the Uninstall option. Some experts even recommend disabling the drivers and later enabling them to fix the Windows 10 black screen after login error.

Since this would reset your drivers, chances are that it can also fix the PC black screen after login problem. Performing a system restore is one of the best ways to fix various issues with a Windows PC like black screen after login. In this, we will revert to a previous Restore Point for all the system settings and user data. Therefore, before you proceed, make sure you already have a Restore Point maintained.

Now, click on the ” System Restore ” button and follow a simple click-through process to restore your computer’s settings. Step 5 : it takes a while to create the bootable drive. Once this is done, you get three 3 options on what to do next. Step 6 : Make sure to change your computer boot sequence to boot from the bootable media you just created. Simply restart your computer and enter the BIOS with function key F12 it varies from system to system.

You can learn more by visiting ‘ how to set the computer to boot from USB drive ‘. Step 7 : Immediately after booting from the bootable drive, Recoverit software launches automatically. It provides an option to ‘copy data from hard disk’ or ‘Data recovery’ from your windows The solutions above are the most effective ways to fix a Windows 10 Black screen before login. Follow the steps to implement the solutions as required. As always, share your thoughts with us in the comments below on this topic and other issues and we’ll do our best to help.

Windows 10 Black Screen Before Login? Read on to find out how to fix it. Download Win Download Mac. David Darlington. How to Solve It?

Perform the basic checks on startup such as: checking the display connection i. You can try to connect the monitor to another computer if you have tightly secured the cable connection. Reinstall your display drivers and adjust the settings of your “Projection”. When I start up my computer the screen is black. When you see a black screen after starting up your computer, you should unplug all your external devices such as the keyboard, mouse, and external hard drive, among others.

Plug them back in one at a time to figure out the source of the problem. Why is my computer screen black after I log in? The following are causes of black screen after login: issues with the update of your display drivers, the screen or monitor having connection issues, as well as problems arising from recent system installations or updates.

You Might Also Like. Other popular Articles From Wondershare. David Darlington staff Editor.